اولین و تنها وب سایت حرفه ای خودت انجام بده فارسی (DIY)

صفحه اصلی » سیاره » سفینه جهانی » گلدان مربعی چوبی
دسته بندی موضوعی : سفینه جهانی
انتشار: ۲۷ فروردین ۱۳۹۱
1,033 بازدید

گلدان مربعی چوبی

نوشته شده توسط | وب سایت/وبلاگ من

تعداد مطالب ارسالی: 172

گلدان مربعی چوبی

Square Planters with Finials

About Project

Make cute planter boxes from wood for just $15 each!

Author Notes:

A few weeks back, my friend Whitney from Shanty2Chic sent me a link to these amazing planters.

گلدان مربعی چوبی

I thought they looked familiar.  Do you recognize them?

گلدان مربعی چوبی

Turns out, these planters are DIY, built and bragged by the super talented Liz H!

I couldn’t wait to draw up plans inspired by Liz H’s planters for Whitney.  For just $15 each, a few days later, Whitney built these.

گلدان مربعی چوبی

So cute!!!

And now, I’m posting plans so you can also build these planters!  Check it out!

And if you want to see more details, Whitney has put together a detailed post on building these planters.  Thanks Whitney!!!

Dimensions

Dimensions:

Dimensions are shown above.

Materials and Tools

Shopping List:

Either 2 – ۱×۶ @ ۸ feet long OR 3 – ۱×۴ @ ۸ feet long
2 – ۱×۲ furring strips @ 8 feet long
1 – ۲×۲ @ ۸ feet long
4 craft finials
1 ¼” PH screws

NOTE: If 2 – ۱×۶ x8’ boards are cheaper than 3 – ۱×۴ x 8’ boards, use three rows of 1x6s instead of four rows of 1×4 for the sides. I’d also make the legs 20” long instead of 18”.
۱ ¼” finish nails
Wood glue
Hardware cloth, tar paper or other material or plastic planter for containing soil on slats

Tools:
measuring tape
square
pencil
safety glasses
hearing protection
drill
circular saw
sander
countersink drill bit

Cut List

Cut List:

4 – ۲×۲ @ ۱۸” long (legs)
16 – ۱×۴ @ ۱۵ ¾” OR 12 – ۱×۶ @ ۱۵ ¾” (sides)
10 – ۱×۲ @ ۱۵ ¾” (bottom slat system)

General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Step 1

First build two ends as shown above. Note that you can build shorter or longer sides – it’s all the same basic construction.

Step 2

To the two ends that you built, add the cleats. It’s easier to do this now then later.

Step 3

Now add the sides – easy peasy!!!

Step 4

And finally, lay slats down. You may wish to add gardener’s cloth to the bottom to protect the wood.

Finishing Instructions

Preparation Instructions:
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

 

Source link

به اشتراک بگذارید...
(1 votes, average: 1.00 out of 1)